Everywhere user guide
Troubleshooting Everywhere
Updated 2026-11-12 · 9 min read
Find your symptom below. Each section gives the likely cause first and the fix after it. If nothing here helps, email hello@everywherefast.com and a person will answer.
First, check these three things
- Are you on the latest version? Choose Check for Updates… in the menu bar menu. Many problems are already fixed in a newer version.
- Is Full Disk Access on? Open System Settings → Privacy & Security → Full Disk Access and check that Everywhere is switched on.
- Has the index finished? The first line of the menu bar menu shows the file count and when it was last updated. If it says indexing or refreshing, wait for it.
Files in Desktop, Documents or Downloads are not found
These folders are protected by macOS. Everywhere can read them only with Full Disk Access. When access is missing, the search panel shows a line saying which folders are not indexed, and the menu bar menu says the same.
- Open System Settings → Privacy & Security → Full Disk Access.
- Switch Everywhere on. If it is not in the list, click + and add it from Applications.
- Quit Everywhere from its menu and open it again.
Everywhere rescans once it has access. Give it a minute, then search again.
Full Disk Access is on, but Everywhere still says folders are not indexed
Work through these in order.
- Update Everywhere. Choose Check for Updates… and install the latest version. Newer versions of macOS changed how apps confirm this permission, and older versions of Everywhere can fail to recognise access that is already on. This is the usual cause on macOS 27.
- Quit and reopen. macOS applies the permission when an app starts. Choose Quit Everywhere in the menu, then open it from Applications.
- Re-add the app. In the Full Disk Access list, select Everywhere and click − to remove it. Click +, add Everywhere from Applications, and switch it on. Then quit and reopen Everywhere.
- Check for a second copy. If there is another Everywhere in Downloads or on the Desktop, delete it and keep the one in Applications.
After the app recognises access, the notice disappears and the protected folders are added at the next scan. You do not need to do anything else.
A file I just created or renamed is not found
New files are normally searchable within seconds. If one is missing, choose Refresh in the menu bar menu. That rescans the disk now.
A file is not found, and it is not in a protected folder
- Check the search. Every word has to match. Remove words until it appears.
- Check Folders to skip in Settings. A file inside a skipped folder is never indexed.
- Check for
.noindex. Folders with that in their name are skipped, as Spotlight does. - Check the drive. Files on an external drive are found only if the drive is connected or cataloged.
- Check Search this Mac. If it is off in Settings, only catalogs are searched.
The menu says some folders could not be read
The menu bar menu shows a line such as "6 folders couldn't be read". Open it to see the list of folders. Click one to see it in Finder.
Most are folders macOS does not let any app read, and they hold nothing you would search for. If one is a folder you care about, click the line itself to open the permission settings, and check Full Disk Access.
⌥Space does nothing
Another app is using the shortcut. Spotlight, Alfred, Raycast and LaunchBar commonly do.
- Open the panel from the menu bar: click the Everywhere icon and choose Search….
- Open Settings → Summon Everywhere and choose a different shortcut. If the menu shows Shortcut unavailable, click it to go straight there.
- Or free ⌥Space in the other app's settings, then set it again in Everywhere.
The Everywhere icon is not in the menu bar
- The app may not be running. Open it from Applications.
- The menu bar may be full. macOS hides icons that do not fit, especially on a MacBook with a notch. Quit another menu bar app, or hold ⌘ and drag icons to reorder them.
Everywhere does not start when I log in
Open the menu bar menu and look at Start at Login.
- Not ticked: click it.
- Pending Approval: open System Settings → General → Login Items and allow Everywhere.
- Click to Retry: click it. Everywhere registers itself again.
Searches with size: or dm: return too little
Right after the first index, Everywhere is still reading file sizes and dates. The panel says so while this is happening. Name searches work throughout. Wait for it to finish and search again.
contains: does not find a document
- The file must be in a folder listed under Settings → Search inside documents. Add the folder if it is not.
- The file must be a PDF, Office, iWork or plain text file.
- Scanned PDFs are pictures of pages and have no text to search.
- Type the word right after the colon:
contains:henderson. - A newly added folder takes a little time to be read.
Results look out of date
Choose Refresh in the menu bar menu. If the status line says the last refresh failed, refresh once more. If it fails again, email us with the message it shows.
Indexing never finishes
If the status says indexing has stalled, eject external and backup drives, then choose Refresh. A very slow or failing drive can hold a scan up.
The search panel opens in the wrong place, or off screen
Choose Troubleshooting → Reset Panel Position in the menu bar menu. The panel returns to the middle of the screen.
Settings does not appear
Settings opens in front of the app you were using. If you left it open on another desktop, choose Settings… again and it comes to the one you are on. If it does not, update to the latest version.
A cataloged drive shows as offline
That is expected when the drive is not connected. Its files stay searchable, and opening one needs the drive. Connect it and the catalog shows as connected again.
A catalog is marked damaged or its last scan failed
- If the drive is available, connect it, select the catalog and click Rescan.
- If that does not fix it, click Forget and catalog the drive again. Nothing on the drive is touched.
Everywhere keeps asking about a drive
Answer the question once. Choosing Not this drive is remembered for that drive.
My licence key is not accepted
- Paste the key from the receipt email. Typing it by hand often introduces an error.
- Check that there are no spaces before or after it.
- Activation needs an internet connection the first time.
- If it still fails, email us from the address you bought with and we will sort it out.
Moving to a new Mac
Install Everywhere on the new Mac and enter your key. If the key is refused because it is still tied to the old Mac, email us and we will release it.
Everywhere is using a lot of CPU
During the first index and during a refresh this is normal and lasts about a minute. If it continues for a long time, check whether a slow external drive is connected, and add very busy folders, such as build output, to Folders to skip in Settings.
Starting again from scratch
Choose Refresh first. That rebuilds what is searchable and fixes most problems.
To remove Everywhere completely, quit it, drag it from Applications to the Trash, and delete the folder ~/Library/Application Support/Everywhere. That folder holds the index and your catalogs.
Contacting support
Email hello@everywherefast.com. Include:
- What you typed, what you expected and what happened.
- Your macOS version, from Apple menu → About This Mac.
- Your Everywhere version, shown near the bottom of the menu bar menu.
- A screenshot, if you can.
Common questions
Why is Everywhere not finding my files?
The usual cause is Full Disk Access. Without it macOS hides Desktop, Documents, Downloads and other folders from the app. Switch Everywhere on under System Settings → Privacy & Security → Full Disk Access, then quit and reopen it.
Full Disk Access is on but Everywhere still asks for it. What do I do?
Install the latest version with Check for Updates, then quit and reopen the app. Recent versions of macOS changed how this permission is confirmed, and the current version of Everywhere handles that.
How do I rebuild the Everywhere index?
Choose Refresh in the menu bar menu. It rescans the disk and takes about a minute.
Why does ⌥Space not open Everywhere?
Another app is using that shortcut. Open Everywhere from its menu bar icon, then pick a different shortcut under Summon Everywhere in Settings.
How do I uninstall Everywhere?
Quit it, drag Everywhere from Applications to the Trash, and delete the folder ~/Library/Application Support/Everywhere, which holds the index and catalogs.
Find any file before you finish typing
Everywhere keeps track of every file on your Mac, including the folders Spotlight
hides and drives you have unplugged. Free for a day, then $19 once.
Version 2.20.4 · macOS 13+
· 4.7 MB · notarised